U.S.A. Standardized Thermometers
ASTM en °C

Informations
NIST traceable A.S.T.M. thermometers.
A.S.T.M is an American standard.
These thermometers are manufactured according to the E-1 specifications of the American Society for Testing and Material (A.S.T.M.).

The colour of the glass of our A.S.T.M thermometers is standardized in yellow giving a much better reading than the white back, mainly for mercury filled thermometers. This is a quality choice even if the white glass is usually less expensive than yellow.

Graduation lines are fine and easily readable.
The measurement scale is fused into the glass with a special manufacturing process makes it completely indelible and very resistant to chemical agents exept fluoridric acid and hot soda (to a lesser extent) because these 2 products attack the glass. Even if you can feel a slight relief on the glass, the thermometer is not engraved.

Every A.S.T.M. thermometer has an individual number printed on the back. This number is stocked in our data base and fully traceable to our Official Masters regularly controlled and traceable in over 68 countries worldwide.

The A.S.T.M thermometer is fully marked on the back with the ASTM number, the purpose and ASTM method. If an A.S.T.M thermometer has an equivalent I.P, both standards are printed on the back of the instrument.

Delivered with Conformity and Traceability Certificate.
On request, can be supplied with "EU" Traceable Calibration Certificate or "EO" Official Calibration Certificate
The A.S.T.M thermometer with Traceable Calibration Certificate are checked at the specified points in the standard.
Available Products
# item +
serie range unit div. immersion applications IP corres. lenght mm package
ASTM 1C
5950.001-qp 1C -20+150 °C 1 76 mm Partial immersion - 322 QP
ASTM 2C
5950.002-qp 2C -5+300 °C 1 76 mm Partial immersion 62C 390 QP
ASTM 3C
5950.003-qp 3C -5+400 °C 1 76 mm Partial immersion 73C 415 QP
ASTM 5C
5950.005-qp 5C -38+50 °C 1 108 mm Cloud and Pour 1C 230 QP
ASTM 6C
5950.006-qp 6C -80+20 °C 1 76 mm Low Cloud and Pour 2C 230 QP
ASTM 7C
5950.007-qp 7C -2+300 °C 1 TOT Low Distillation 5C 385 QP
ASTM 8C
5950.008-qp 8C -2+400 °C 1 TOT High Distillation 6C 385 QP
ASTM 9C
5950.009-qp 9C -5+110 °C 0.5 57 mm Low Pensky-Martens 15C 290 QP
ASTM 10C
5950.010-qp 10C +90+370 °C 2 57 mm High Pensky-Martens 16C 290 QP
ASTM 11C
5950.011-qp 11C -6+400 °C 2 25 mm Cleveland Open Flash 28C 310 QP
ASTM 12C
5950.012-qp 12C -20+102 °C 0.2 TOT Density-Wide Range 64C 420 QP
ASTM 13C
5950.013-qp 13C +155+170 °C 0.5 TOT Loss on Heat 47C 155 QP
ASTM 14C
5950.014-qp 14C +38+82 °C 0.1 79 mm Wax Melting Point 17C 375 QP
ASTM 15C
5950.015-qp 15C -2+80 °C 0.2 TOT Low Softening Point 60C 395 QP
ASTM 16C
5950.016-qp 16C +30+200 °C 0.5 TOT High Softening Point 61C 395 QP
Packing
Square plastic box Square plastic box Round plastic box Round plastic box Carton box Carton box
Blister pack Blister pack Protection  case Protection case In bulk In bulk


Copyright © 2008 - Alla France - All rights reserved - Sitemap - Powered by Fictis